The FLH Project Development and Design Manual.
|Park Road Standards|
National Park Service, 1984
Design standards for use on Park road projects
|CADD Tips and Tricks|
Information about the Computer Aided Design and Drafting (CADD) software used by FLH
|Separated Bike Lane Planning and Design Guide|
The Guide outlines planning considerations and design options for separated bike lanes.
|Design Visualization Guide|
This document introduces visualization tools and innovative visualization practices
|Flexibility in Highway Design|
This FHWA document illustrates the flexibility already available to designers within adopted standards.
|FWS Roadway Design Guidelines|
US Fish and Wildlife Service (FWS), 2012
Highlights state of the art ecological, planning, design and engineering considerations for roadway projects located within FWS managed lands
|Specification Writers' Guide For Federal Lands Highway|
FHWA, May 2008
This Guide is intended for writers that develop specifications for the Federal Highway Administration's (FHWA) Federal Lands Highway Program (FLH). This Guide is to promote and facilitate the writing of specifications that conform to the five Cs of specification writing -- clear, concise, complete, correct, and consistent.
|FLH Specification Procedures|
FHWA, May 2008
Procedures for creating and using specifications for FLH projects.
|Development and Review of Specifications|
FHWA, March 2010
This technical advisory was developed for the FHWA division office staff for use in interacting with State specifications. However the document also contains best practices and recommendations useful for developing and writing clear, concise, correct, complete, and consistent specifications. (See the attachments beginning on page 23.)
Signs and Markings
The current Manual on Uniform Traffic Control Devices.
|Standard Highway Signs|
The current Standard Highway Signs manual.
|Sign and Poster Guidelines for the Forest Service|
USDA Forest Service, 2013
Forest Service policy regarding signs and posters.
|DOD Supplement to the MUTCD|
Department of Defense, 2015
Supplements to the MUTCD for use on military bases.
|Barrier Guide for Low Volume and Low Speed Roads|
This Guide is intended to provide assistance in the warranting, selection, and design of roadside barriers. The Guide is prepared specifically for warranting, selecting, and designing barriers on Federal Lands Highways projects that are low volume and/or low speed facilities. The guidelines present practical and useful guidance for common conditions and situations encountered in the design of roadside barriers for Federal Lands Highway projects.
|AASHTO Task Force 13|
Task Force 13 develops, recommends, and promotes standards and specifications for bridge and road hardware used by highway and transportation agencies on the nation's roadways. Site contains links to publications describing current roadside hardware.
|Rumble Strip Guidelines: For Shoulder and Centerline Applications |
Provides FLH guidance for when and where to install rumble strips.
|FHWA Environment Resources|
Links to environmental resources at FHWA.
|Environmental Review Toolkit|
Links to FHWA and other U.S. Department of Transportation (DOT) policies, procedures, and guidance related to the environment and transportation.
|Roadside Revegetation: An Integrated Approach to Establishing Native Plants |
This report offers an integrated approach to facilitate the successful establishment of native plants along roadsides and other areas of disturbance associated with road modifications.
|Roadside Use of Native Plants|
Listing of native plants by state.
Updated: Wednesday, February 10, 2021