USA Banner

Official US Government Icon

Official websites use .gov
A .gov website belongs to an official government organization in the United States.

Secure Site Icon

Secure .gov websites use HTTPS
A lock ( ) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.

U.S. Department of Transportation U.S. Department of Transportation Icon United States Department of Transportation United States Department of Transportation
FHWA Highway Safety Programs

Appendix A: Low-Cost Safety Improvements in Pennsylvania

Appendix A: Low-Cost Safety Improvements in Pennsylvania

BACKGROUND

A higher percentage of fatal curve-related crashes occur on rural roads–particularly on two-lane rural roads–due largely in part to the predominance of horizontal curves on typical rural roads. In 2013, more than 13 percent of fatal crashes in Pennsylvania occurred due to Curve Driver Error Crashes, many of which involved roadway departures. To address curve-related crashes, the Pennsylvania Department of Transportation (PennDOT) provided guidance to the districts on the implementation of enhanced sign and marking improvements for curves that exhibit a higher than expected crash frequency. PennDOT identified priority curves by examining crash frequency, crash rate, and crash severity.

Photograph of a two-lane roadway with a horizontal curve. A horizontal curve warning sign is supplemented with a speed advisory plaque on the bottom and an orange flag on the top. The signs are installed on the right side of the roadway prior to the curve. Chevrons are also installed along the outside of the curve.

Figure A-1. Photo. An orange flag supplementing the reverse curve warning sign and speed advisory plaque. Chevrons were also used to delineate the curve.

PROGRAM DETAILS

Pavement markings in advance of horizontal curves provide additional warning information, and can also be considered at curve locations where signs alone have been shown to be insufficient. Systematic implementation of improvements on curves is taking place throughout Pennsylvania and include one or more of the following strategies:

  • Oversized fluorescent yellow advance curve warning signs that could be doubled up (i.e., both sides of the roadway), with optional flashing yellow LED solar powered beacons.
  • Advanced curve pavement markings including a "SLOW" legend or "XX MPH" advisory speed marking as an alternate. (NOTE: Since the PennDOT program began, the NCHRP Report 600 has since been released and contains design guidelines as to which markings are effective in reducing speeds at horizontal curves and which markings are not as effective (p. 20-4)).
  • Correction of any shoulder drop offs within the curve.
  • Chevron delineation around the curve.
  • Curve widening.

PennDOT estimates there have been between 500 to 600 applications of the low-cost safety improvements throughout the State, many of which have been State funded.

RESULTS

PennDOT Districts have found this combination of treatments, when utilized correctly, effectively contributes to combatting curve-related crashes. Data suggests these safety treatments have improved safety on specifically identified horizontal curves. Overall, Curve Driver Error Crashes have fallen from a five-year average of 6,798 in 2007 to 5,060 in 2012. A three-year before/after analysis of locations where a combination of these countermeasures were implemented between 2000 and 2008 resulted in the following:

  • Decrease in overall crashes from 1,452 to 1,200 (17-percent reduction).
  • Decrease in fatal crashes from 27 to 15 (44-percent reduction).
  • Decrease in major injury crashes from 65 to 39 (40-percent reduction).

When the treatment was first introduced, there were concerns of motorcycles slipping on the paint (2001); but over time, the treatments have become widely accepted and the general public have not voiced any other concerns.

CONSIDERATIONS

PennDOT stresses the importance of sound engineering judgment when selecting the combination of countermeasures for implementation. Additionally, speed limit compliance, geometric features of the curve, sight distance, and traffic volume must be taken into consideration when implementing this treatment. Finally, high friction surface treatment should be considered as another possible countermeasure where wet pavement/curve related crashes occur at a higher rate.

As noted, NCHRP Report 600 has since been released and contains design guidelines as to which markings are effective in reducing speeds at horizontal curves and which markings are not as effective.

CONTACT INFORMATION

The Traffic and Safety Section of PennDOT provided the information for this case study. Visit http://www.penndot.gov/ for more information. All images are courtesy of PennDOT.