The FLH-Cells.cel cell library contains plan borders and graphics used commonly on FLH projects completed using MicroStation Connect Edition and ORD. The cell library is available with the WorkSpace Downloads.

Categories

• Plan Sheets
• Profile Sheets
• Symbols
• Cross Section Sheets
• TS&L Sheets

Plan Sheets

Base.B.US B-Size Base Sheet is used for Title sheets and other drawings without a Sheet Title Block. This cell serves as a base sheet for the other border cells

Plan.B.US B-Size Plan Sheet is used for typical full sheet plan sheets without a profile and for project specific details in WFL

Note: Metric versions are also available (same name with .M instead of .US)

Plan and Profile Sheets

Plan-Profile.B.US B-Size Plan-Profile Sheet is used for plan-profile drawings

Plan-Plan.B.US B-Size Double Plan Sheet is used for double plan drawings where no profile is needed

Profile.B.US B-Size Profile Sheet - used for full sheet profile sheets

Note: Metric versions are also available (same name with .M instead of .US)

Commonly used symbols

Arrow.Area used in FLH Dimension Style library to denote an area

Arrow.Qty use in FLH Dimension Style library for earthwork arrows (WFL only)

Centerline centerline symbol used in cross-sections

Cross-Section Sheets

XS-Lan.B.US B-Size Cross-Section Sheet (Landscape Mode) is used for cross-sections laid out horizontally

XS-Por.B.US B-Size Cross-Section Sheet (Portrait Mode) is used for cross-sections laid out vertically

XS.A.US A-Size Cross-Section Sheet - used for letter sized cross-sections

Note: Metric versions are also available (same name with .M instead of .US)

Type Size and Location (TS&L) Sheets

The following TS&L sheets are available:

• TSL-1.US
• TSL-2A.US
• TSL-2B.US

Note: Metric versions are also available (same name with .M instead of .US)