You are here

Develop Traffic Capacity Models for Mini-Roundabouts from Simulation

Project Information

Project ID: 
Project Abstract: 

No capacity models for mini-roundabouts exist, other than from ARCADI, a UK model whose equations are unpublished. Based on VisSim and using typical sizes of small size roundabouts, layouts and models will be developed to simulate at least two typical designs. The models will include effects of large vehicles and assumptions about driving behaviors. The objective is to simulate numerous traffic scenarios representative of all possible traffic volume conditions and estimate maximum throughput at one of the approaches. The maximum throughput data will be fitted in an exponential function as a function of circulating or conflicting volume, and percent of large vehicles.


Develop capacity equations for a 50' and 75' inscribed circle diameter (ICD) mini-roundabout from driver performance in the United States.

Research HUB ID: 
Project Status: 
Project Funding Amount (Contract Award Amount): 
Start Date: 
Monday, May 30, 2011
End Date: 
Friday, March 30, 2012
Public Access Plan: 
Saxton Transportation Operations Laboratory
FHWA AMRP Program: 
Project Outputs: 

This research has presented a methodology to estimate parameters of an analytical capacity model for the 50' and 75' inscribed circle diameter (ICD) mini-roundabouts. The linear models presented are based on VisSim simulation results where VisSim has been calibrated from field data. The models presented include parameters for the 50' and 75' inscribed circle diameter (ICD) mini-roundabout designs. The simulation results suggest that linear models provide useful estimates of capacity for the two selected prototype designs. Estimated capacity for the 50' ICD mini-roundabout is smaller than the 75' ICD where heavy vehicles are shown to affect the capacity at high heavy vehicle presence. When comparing the land required to construct or convert from an all-way stop-control (AWSC) to a mini-roundabout or single-lane roundabout, the mini-roundabout has higher entering capacity per square foot. This would be a useful design when optimizing existing land in urban areas to increase capacity at lower cost.

For more information, see Determination of Mini-Roundabout Capacity in the United States.

Contact Information