Downloads for In-Service Performance Evaluation Resources (ISPE)
The Federal Highway Administration (FHWA) Office of Safety Research and Development conducted a pilot ISPE of the most widely used energy absorbing guardrail end terminals (GETs) in the United States, specifically: ET-Plus, ET-2000, Flared Energy Absorbing End Terminal (FLEAT), Slotted Kinking Terminal (SKT), Manual for Assessing Safety Hardware Slotted Kinking Terminal (MSKT), X-Lite, X-Tension, and Soft Stop.
Data were collected at test sites in four States that have agreed to participate in this pilot study: Massachusetts, Pennsylvania, California, and Missouri. This work is being done in cooperation with the National Highway Traffic Safety Administration (NHTSA), the Resource Center's Safety Technical Services Team, the Office of Safety and the division offices in each of the data collection States. The study did not collect data across the entire State. The pilot study only collected data in a few State-selected regions. For more information about this study, go to the main ISPE Resources page. To download a data file, click on the zip file below and save to your computer.
The U.S. Government does not endorse products or manufacturers. Trademarks or manufacturers’ names appear in this document only because they are considered essential to the objective of the project. They are included for informational purposes only and are not intended to reflect a preference, approval, or endorsement of any one product or entity.
The following images and/or content may be visually or emotionally distributing to some viewers. Please use discretion.
State | Zip file containing data and listing of documents |
California | Caltrans.zip (1.3GB) |
Massachusetts | MassDOT.zip (247.4MB) |
Missouri | MoDOT.zip (303.2MB) |
Pennsylvania | PennDOT.zip (993.7MB) |
Pennsylvania | PTC.zip (283.8MB) |
Project Manager and Point of Contact
Ana Maria Eigen, D.Sc
FHWA Office of Safety Research and Development
ana.eigen@dot.gov